Lian Li 011D Evo C1 EVO Distroplate - Acryl

The Lian Li 011D EVO is launched and with it our Distroplate "C1 EVO". The case amazes with its versatility. In addition to the option of installing the graphics card vertically or upright, the entire housing can be turned upside down, and with it our distroplate! A reverse setup is possible in no time. Features in detail The water channels are arranged in such a way that there is always a clean build. There are three independent channels with a total of 18x G1/4" ports to connect the CPU, GPU and up to 3x 360mm radiators with each other. Our "C1 EVO" is mounted behind the tempered glass pane. There are standard holes in the frame of the housing, which means that our Distroplate can be easily fixed with only 4 screws. The Distroplate comes with a pre-installed RGB Stripe.
The Lian Li 011D EVO is launched and with it our Distroplate C1 EVO. The case amazes with its versatility. In addition to the option of installing the graphics card vertically or upright, the entire housing can be turned upside down, and with it our distroplate! A reverse setup is possible in no time. Features in detail The water channels are arranged in such a way that there is always a clean build. There are three independent channels with a total of 18x G1/4 ports to connect the CPU, GPU and up to 3x 360mm radiators with each other. Our C1 EVO is mounted behind the tempered glass pane. There are standard holes in the frame of the housing, which means that our Distroplate can be easily fixed with only 4 screws. The Distroplate comes with a pre-installed RGB Stripe. This ensures a nice ambience in the gaming room and gives our C1 EVO that certain something. A new universal pump adapter now allows the installation of a D5 or DDC pump. Free choice, no additional costs! The filling of the Distroplate is very easy to do when installed. All you have to do is remove the tempered glass pane. The filling hole is in the upper area. As usual, we rely on the most transparent look possible. Only the chambers and reservoirs are first roughed with our CNC machines and then finished in the second pass, giving them a slightly milled finish. Mit der installierten Distroplate beträgt die maximale Radiatordicke wie folgt: Top: 48 mm + max. 25 mm fan thickness Bottom: 48 mm + max. 25 mm fan thickness Side: 50 mm + max. 25 mm fan thickness Features at a glance • can be used inverted • addressable RGB stripe incl. • 18x G1/4” ports distributed over 3 channels & 1 reservoir • four screws for quick assembly • universal adapter for D5 & DDC Technical details • Product dimensions: Dimensions with adapter (B x H x T): 402 x 207 x 36 mm • Color: Clear • Material: Acrylic Glass, Plastic • Connections: 18x G1/4 Ports Delivery scope • 1x Lian Li Evo C1 EVO • 4x mounting screws • 1x universeller Adapter for D5 & DDC Assembly Instructions Installation manual EN Important note Compatible only with Lian Li PC-O11D Evo case. The DDC pump or D5 pump is water lubricated and must not run dry; otherwise permanent bearing damage may occur. The PC case is for display purposes only and does not come with the product. Fittings Please only screw hand-tight into the distroplate, do not use a wrench. Danger: If the fittings are too tight, the acrylic may crack and leak!

Premium Watercooling - Distroplates, Reservoir and more

ONE Distribution Plate for TWO PC Build Configurations in the Lian

EK Water Blocks EK-Quantum Reflection² PC-O11D EVO XL D5 PWM D-RGB

O11D EVO Gets An EK-Quantum Reflection² Distribution Plate

New Waterloop Complete! See photos

The Lian Li 011D EVO is launched and with it our reservoir S1 EVO., The case amazes with its versatility. In addition to the option of installing

Lian Li 011D S1 EVO Reservoir - Acrylic

O11D EVO Distro Plate G2 – LIAN LI is a Leading Provider of PC

Lian Li O11D XL EVO Rear Distribution Plate - Singularity Computers

A successful combination. Our set consists of two products that can also be purchased individually in the shop. However, they complement each other so

Lian Li 011D EVO SET S1 Reservoir + Distroplate D3

Build 011D Mini - Full ATX with 3 radiators and STEALKEY V2 Distro

Explore the Lian Li C1 EVO Distroplate, designed for the Lian Li 011D EVO case. With 18x G1/4 ports, it connects CPU, GPU, and up to 3x 360mm

Lian Li 011D Evo C1 EVO Distroplate

EK Water Blocks EK-Quantum Reflection² PC-O11D EVO XL D5 PWM D-RGB

The Distroplate D3 was specially developed for the Lian Li O11 Dynamic EVO. It enables components such as the graphics card, processor and radiator to

Lian Li 011D Evo D3 Distroplate - Acrylic

Lian Li O11D EVO Mid-Tower Case - Black

The Alphacool Core Distro Plate is the visual upgrade for the O11 Dynamic Evo/XL. It is designed for this case and can be mounted on the inner side…

13743 Alphacool Core Distro Plate O11 Dynamic Evo/XL with Apex VPP pump