Google Wifi flashing - help - Installing and Using OpenWrt - OpenWrt Forum

Hi, I am following the instructions here: I get to stage 4 (plug the usb in), and it never gets to stage 5. The LED does not turn off. Can anyone that knows what they are doing help? The powered hub seems to be working? It is supplying power. I cannot know whether it is sharing out the USB disks. It is one of these: Obviously I have no disks plugged in while I perform the reset, and only plug one in when it gets to reset mode. I have tried with 3 different USB drives, 2xUSB2, 1xUSB

OpenWrt on Raspberry Pi: Use your Pi as a router (Tutorial) – RaspberryTips

Getting Started with OpenWRT

OpenWrt 22.03: disable NAT for specific IP addresses - Network and Wireless Configuration - OpenWrt Forum

Google wifi hardware now supported by OpenWrt : r/openwrt

Install on litebeam_5ac_gen2 - Installing and Using OpenWrt - OpenWrt Forum

OpenWrt as a wifi client and access point - Installing and Using OpenWrt - OpenWrt Forum

Installing OpenWRT on Pirelli Discuss A226G router – BASEMENT ENGINEERING & MODS

Google wifi hardware now supported by OpenWrt : r/openwrt

OpenWrt not accessible after flashing custom firmware - Installing and Using OpenWrt - OpenWrt Forum

MT-3000 and AC313U dongle problem - Technical Support for Routers - GL.iNet

OpenWrt on a Raspberry Pi

How to Upgrade a Router // OpenWrt (How To Guide)

Can't open correctly ports in OpenWrt - Network and Wireless Configuration - OpenWrt Forum

Banana pi R3 use vpn funtion need install openvpn - Banana Pi BPI-R4/BPI-R3 Mini/BPI-R3/BPI-R64/BPI-R2 - banana pi single board computer open source project official forum BPI team

Flashing OpenWrt to Ubiquiti UniFi AP (stock flash ver >= 4.0.15) - Installing and Using OpenWrt - OpenWrt Forum